RECOVERY TEST CAPABILITY

Start recovery

After 1 min.

After 3 min.
FILSTAR type "S" - Easy to seprate Hard to separate
Medium
Tank
Particle

Pump
: Water
: 15 liters
: Silicon Carbide (SiC)
 
(Diameter: 10 - 20 microns)
: 15 liters / min.
Particles over 10 microns Particles under 10 microns
High density particles Low density particles
Objects that sinks Objects that float
Iron scraps Styrofoam
Aliminum scraps Paper
98% recovery was achieved!! Sand Light foodstuff
LIFE SPAN OF ELEMENTLESS FILSTAR
Elementless Filstar's finishing treatment of the inner surface makes it far less porous and/or rough like other centrifugal separators or liquid cyclones in the market. This inner surface treatment makes for smoother operation and longer life span.


Kindly note that with every application (water, light oil, emulsion, etc.), Elementless Filstar's life span (endurance, efficiency, etc.) differs. However, as experience goes, we have a satisfied customer who has been using our product collecting Tungsten Carbide (emulsion as coolant) for 4 years without any inefficiency.
TEMPERATURE
Increased heat level and cooling time to ambient temperature required depends on the pump and surrounding equipment. Elementless Filstar's tolerant temperature is approx. 200 degrees Celsius (392 degrees Fahrenheit). However, the brass ball valve can only withstand up to approx. 80 degrees Celsius (176 dg. Fahrenheit). For higher temperatures, please contact our representatives near you.

1. SUPER-CENTRIFUGAL BLOCK
Liquid filled with impurities (sludge, dust, solids) enters FILSTAR's inlet and passes through the super-centrifugal state. Liquid removed of and separated from impurities instantly flows through the outlet. Waste particles are forced downward.

2. HIGH PRECIPITATION BLOCK
Impurities forced downward due to specially processd surface treatment passes through the high-precipitation block which further separates solids with high precision.

3. CALM PRECIPITATION BLOCK
Waste is rapidly gathered at the bottom by medium (fluid e.g. eater, coolants, emulsion, etc.) pressure for draining.

4. DRAIN
Waste sediments rapidly collected can be removed removed manually or automatically using an electric actuator with timer. Sludge is forced out as soon as the drain valve opens.


Home
Product
Technology
Advantages
Applications
Materials
Projects
Machining
References
Options
Company
Photo Gallery










Elementless Filstar - A hybrid of Centrifugal Separator and Liquid Cyclone Filter